Forum » Off-Topic » Off-Topic Discussions » Clients can choose between two ways of degassing unit

Clients can choose between two ways of degassing unit

  • 2266
    We extremely appreciate your website post. There are dozens of techniques we could put it to proper use with a minimum of effort with time and capital. Thank you so much for helping make the post give light to many queries we have got before now. Green Energy Consulting
      October 26, 2022 1:32 AM PDT
    0
  • The combination lock system keeps your belongings safe and secure Top 10 Best Backpack with Built-in Lunch box In 2024, while the activated carbon lining and filtering non-woven fabric offer superior odor protection.

      September 28, 2022 11:32 AM PDT
    0
  • 164
    Adtech degassing unit 10 / 20 / 30
    The ENA is suitable for system pressures from up to 0,8 bar. This makes the SOTEX ENA particularly suitable for use in heating systems in international horticulture. In these systems low pressures (about 0,8 to 1 bar) and hose systems are common networks. A hose just causes more air inlet into the heating water system than a steel heating system. The ideal situation for applying a vacuum de-aeration unit. Air in these heating systems causes poor water circulation and reduces power transmission. The SOTEX ENA prevents these inconveniences. Clients can choose between two ways of degassing unit;
    - Turbo-degassing: rapid and effective degassing after installation, without gaps between the de-aerating cycles.
    - Normal venting: energy eff icient operation by programming longer breaks between the de-aerating cycles.aThe user of the a can choose between two ways of
    By an RS 485 interface, all machine parameters are transferred to a building management system. The ENA does self-monitoring through a plausibility check-on the sensor values. A collective fault signal is possible.
    In combination with the optional water supply unit NFE, the ENA can also be used as refill unit.
     
      July 24, 2022 8:30 PM PDT
    0